A DISCOM approved solar installer in Janakpuri is a vendor registered with BSES Rajdhani Power Limited (BRPL), the power company that supplies Janakpuri, on the PM Surya Ghar national portal. Only these vendors can install a rooftop system that qualifies for the central subsidy, the Delhi state subsidy and BRPL net metering.
The rules changed a lot in late 2026. Delhi now offers a free 3 kW rooftop system to many households, but under that route the government picks the installer, not you. This guide shows you which route you fall in, how to check any installer’s empanelment yourself in a few minutes, and what to ask before you pay a single rupee. Never pay an advance to a vendor you have not personally verified on the official portal.
Quick Overview
| Question | Short Answer for Janakpuri Homes |
|---|---|
| Which DISCOM covers Janakpuri? | BSES Rajdhani Power Limited (BRPL). Check the name printed at the top of your bill. |
| Where is the official installer list? | The vendor list on pmsuryaghar.gov.in (select Delhi and BRPL), the empanelled vendors page on the Delhi Solar Portal, and BRPL’s rooftop solar portal. |
| Do I get to choose my installer? | Yes on the open route. No on the free solar (ULA) route, where IPGCL selects vendors by tender. |
| Maximum subsidy for a home? | Up to ₹78,000 central plus up to ₹78,000 Delhi subsidy, so up to ₹1.56 lakh for an eligible system of up to 3 kW. |
| Who gets solar at zero upfront cost? | Domestic consumers with average use of up to 400 units a month in FY 2025-26, subject to technical feasibility. |
| Does BRPL need to approve my roof first? | Systems up to 10 kW do not need a separate technical feasibility study if the application is complete. |
What Does “DISCOM Approved Solar Installer” Actually Mean in Delhi?
It means the installer is registered (empanelled) for your specific DISCOM on the PM Surya Ghar national portal. In Delhi, a vendor is empanelled DISCOM by DISCOM. So a company approved for Tata Power-DDL in North Delhi is not automatically approved for BRPL in Janakpuri.
You will see three similar terms on installer websites and Google listings. Here is what each one really means:
- DISCOM empanelled vendor: Registered by BRPL (or registered nationally) on the PM Surya Ghar portal and visible in the BRPL vendor list. This is the one that matters for your subsidy.
- “MNRE approved” vendor: MNRE does not hand out a separate approval badge to installers. When a company says this, it usually means it is registered on the MNRE-run national portal. Ask for the registration details and check them.
- ALMM approved panels: This is about the solar modules, not the installer. Subsidised systems must use Indian-made (DCR) modules from the approved list.
Important Point to be Considered! A Google Maps listing, a “verified” tag on a directory site or a line on a company website saying “DISCOM approved” is not proof. The only proof is the vendor’s name in the official list for BRPL.
Which Route Are You On: Free Solar (ULA) or Open Route?
Your route decides whether you can pick your own installer. Delhi’s second amendment to the Delhi Solar Energy Policy 2023, notified on 17 September 2026, created two ways for homes to go solar.
| Point | Free Solar / ULA Route | Open Route |
|---|---|---|
| Who picks the installer | Vendor selected through a tender by IPGCL (a Delhi government power company) and allotted area-wise | You choose any vendor empanelled for BRPL |
| Who it suits | Domestic homes averaging up to 400 units a month in FY 2025-26 | Homes above 400 units, homes wanting more than 3 kW, or anyone who wants a specific brand or design |
| System size | 2 kW or 3 kW | Sized to your roof and load |
| What you pay | Zero upfront for eligible homes | Vendor’s price minus the subsidies you qualify for |
| Maintenance | 5 years free by the selected vendor | 5 years comprehensive maintenance by the registered vendor, as per PM Surya Ghar guidelines |
As of mid-November 2026, the vendor tender for the free solar route was still being finalised, and site surveys for applicants had not started. Over 51,000 of the Delhi applications came from the BRPL area alone. So if you registered on solar.delhi.gov.in, you are waiting in a queue, not for a private installer.
Pro Tip! If a private installer in Janakpuri tells you they will “handle your free 3 kW scheme” and asks for a booking amount, be careful. Under the ULA route the installer is assigned by the government process, so no private company can promise you that slot.
How Do You Check If a Solar Installer Is Empanelled with BRPL?
Search the installer’s exact legal company name in the PM Surya Ghar vendor list for Delhi and BRPL. If the name is not there, the installation will not qualify for subsidy. The whole check takes about 10 minutes.
- Ask for the registered company name. Not the brand name on their banner. Many Janakpuri installers trade under a short brand but are registered as a private limited company or LLP.
- Open the national portal. Go to the vendor list on the PM Surya Ghar national portal, select NCT of Delhi and then BSES Rajdhani Power Limited.
- Match the name and details. Check the company name, registration details and contact details match what the salesperson gave you.
- Check the vendor rating if shown. MNRE runs a vendor rating programme for registered vendors based on installations done through the portal. A vendor with a record of completed BRPL installations is a safer bet than one with none.
- Cross-check on the Delhi Solar Portal. The Delhi Solar Portal has an “Empanelled vendors” section with a separate list for BRPL.
- Ask for paperwork. A genuine vendor will happily share its empanelment proof, GST registration and a sample consumer-vendor agreement.
Important Point to be Considered! Google results for this search show an old “Final Vendor List” PDF from the Delhi Power Department with rates and vendor addresses, including one in Janakpuri District Centre. That list comes from an older rooftop solar programme. Do not use it to judge whether a vendor is approved today. Always use the live portal list.
If you live in another BRPL area like Dwarka, the same method applies. We have covered it in our guide to checking MNRE empanelled solar vendors in Dwarka.
How Much Subsidy Can a Janakpuri Home Get in 2026?
An eligible Janakpuri home can get up to ₹1.56 lakh in total subsidy for a system of up to 3 kW: up to ₹78,000 from the Centre and up to ₹78,000 from the Delhi government.
| System Size | Central Subsidy (PM Surya Ghar) | Delhi State Subsidy (Max) | Total (Max) |
|---|---|---|---|
| 1 kW | ₹30,000 | ₹26,000 | ₹56,000 |
| 2 kW | ₹60,000 | ₹52,000 | ₹1,12,000 |
| 3 kW | ₹78,000 | ₹78,000 | ₹1,56,000 |
| Above 3 kW (up to 10 kW) | ₹78,000 (capped) | No additional subsidy beyond 3 kW | ₹1,56,000 (capped) |
The central figure is fixed at ₹30,000 per kW for the first 2 kW and ₹18,000 for the third kW. The Delhi figure is listed on the official portal as up to ₹26,000 per kW, and news reports note it is linked to installation cost discovered through bidding. So the exact state amount on the open route can depend on how the department applies the rules to your case. Check the current numbers on our Delhi solar subsidy guide before you sign.
Older blogs are wrong here. Many pages still say Delhi gives ₹2,000 per kW or ₹10,000 per kW (₹30,000 for 3 kW). Those were the earlier versions of the policy. The September 2026 amendment raised the Delhi subsidy to up to ₹78,000.
What Happened to the Generation Based Incentive (GBI)?
Under the earlier Delhi policy, homes got a monthly GBI of ₹3 per unit for systems up to 3 kW and ₹2 per unit for 3 to 10 kW, paid over five years. The 2026 amendment revised this for new residential installations, moving support to an upfront, one-time form instead of monthly instalments. If an installer’s quote still shows five years of GBI income in the payback calculation, ask them to show you where the current rule says so.
How Much Does Rooftop Solar Cost in Janakpuri After Subsidy?
For a 3 kW system, published market estimates for Delhi range from about ₹2.3 lakh to ₹2.4 lakh before subsidy. After the full ₹1.56 lakh subsidy, an open-route buyer could be looking at roughly ₹75,000 to ₹85,000 out of pocket, depending on the vendor, panel type and structure.
Janakpuri roofs often push the price up a little because of:
- Elevated mounting structures to clear water tanks, mumty walls and dish antennas on DDA and builder-floor roofs
- Longer cable runs when the meter is on the ground floor and the panels are three or four floors up
- Bifacial or higher-wattage modules when roof space is tight
Our breakdown of 3 kW rooftop solar system cost after subsidy in Delhi shows how these line items add up.
Which Size Should a Janakpuri Home Choose?
Match the size to your monthly units. The government’s own sizing guide suggests 1 to 2 kW for up to 150 units a month, 2 to 3 kW for 150 to 300 units, and above 3 kW for more than 300 units. A 3 kW system in Delhi generates around 300 units a month on average.
Here is how that plays out for typical Janakpuri homes:
- DDA flat with 2 ACs, summer bill around 350 to 450 units: 3 kW usually makes sense. If your yearly average stayed under 400 units in FY 2025-26, check the free solar route first.
- Independent house or full builder floor with 4 or more ACs: 5 kW or more. You will be on the open route for anything above 3 kW, and you pay full cost for the extra capacity.
- Single floor of a shared builder floor: size is limited by your share of the roof, not just your load.
What Should Janakpuri Builder Floor and DDA Flat Owners Know?
Roof rights are the biggest hurdle in Janakpuri, not the installer. Most of the area is DDA housing and redeveloped builder floors where the roof is shared or belongs to the top-floor owner.
- Get written consent. If the roof is common, get a signed NOC from the other owners before the installer starts. BRPL’s process needs roof permission details at the application stage.
- Top-floor roof rights: In many builder floors, roof rights are sold with the top floor. If you live on the first floor, you may simply not have roof access to install.
- Bill in a relative’s name: The applicant’s name and CA number must match the electricity bill. If the bill is still in a late parent’s name, apply for a name change with BRPL first. This single issue stalls many applications.
- RWA option: For DDA pockets, an RWA or group housing society can install a common system. Delhi offers ₹11,000 per kWp for common facilities, and DERC allows group net metering and virtual net metering.
- Shadow check: Tall neem and peepal trees along Janakpuri’s internal roads and neighbouring floors added later can shade panels in winter mornings. Ask the installer for a shadow analysis, not just a quick roof visit.
If you own an independent house, our step-by-step guide to the rooftop solar installation process for an independent house in Delhi covers the full sequence.
What Does an Empanelled Installer Handle with BRPL?
A genuine empanelled vendor files your net metering application on BRPL’s rooftop solar portal, installs the system, uploads completion documents and helps you claim the subsidy. On the open route, BRPL’s own order for subsidy customers is simple: register on the national portal, choose a vendor, then authorise that vendor to apply for net metering.
- Register on pmsuryaghar.gov.in with your BRPL CA number and choose your vendor.
- Net metering application is filed on the BRPL portal. For systems up to 10 kW, a complete application is deemed accepted without a technical feasibility study.
- Agreements: You sign the net metering connection agreement and a consumer-vendor agreement.
- Installation is usually done on site in a few days for a home system.
- Inspection and net meter: BRPL inspects the system and installs the net meter.
- Subsidy claim: You upload bank details and the subsidy is released after DISCOM inspection and approval.
The detailed steps and screens are in our guide to the BSES solar net metering application process, and the paperwork list is in documents required for solar net metering in Delhi.
Pro Tip! Check your first bill after the net meter goes live. It should show import and export units separately. If it does not, raise it with BRPL straight away.
What Should You Ask a Janakpuri Solar Installer Before Signing?
Ask questions that a non-empanelled or careless vendor cannot answer well. Use this list during the site visit:
- What is your exact registered name, and can I see you in the BRPL list on the PM Surya Ghar portal right now?
- Which DCR module brand and wattage are you quoting, and is it on the ALMM list?
- Which inverter brand and model, and does it carry the required IEC certificates?
- What is the height and material of the mounting structure, and is it designed for Delhi wind loads?
- Who handles the 5-year free maintenance, and what is the response time for a breakdown in Janakpuri?
- Is the net meter cost included in the quote or extra?
- What is the payment schedule, and how much is due only after BRPL commissioning?
When you have two or three quotes, line them up using our checklist on how to compare rooftop solar quotations in Delhi.
What Are the Red Flags When Choosing a Solar Vendor in Janakpuri?
The biggest red flag is a vendor whose name you cannot find in the BRPL list. Others to watch for:
- A large advance (more than a small booking amount) before any paperwork is filed
- “Free solar” promises from a private company for homes above 400 units
- Non-DCR or imported panels quoted under a subsidy package
- Payback charts that still include the old monthly GBI
- No written consumer-vendor agreement
- A quote that does not mention the net meter, structure height or warranty terms
Important Point to be Considered! If your installation is done by an unregistered vendor, your subsidy application can be rejected. Getting it right at the start is far easier than fixing it after the panels are on the roof.
How Do You Track Your Application or Complain About a Vendor?
Track a Delhi application on the Delhi Solar Portal and the PM Surya Ghar portal using your registered mobile number. Our walkthrough on the Delhi Solar Portal application status check shows each status and what it means.
For BRPL net metering issues, call BRPL’s helpline 19123 or email the net metering cell. If a vendor fails to complete work or maintenance, raise a complaint through the grievance section of the PM Surya Ghar portal. The Delhi Solar Portal also lists a complaints option for the state scheme. If BRPL does not resolve a billing or metering problem, you can approach BRPL’s Consumer Grievance Redressal Forum (CGRF).
Frequently Asked Questions
Can I install solar in Janakpuri through a vendor that is not empanelled?
Yes, but you lose the subsidy. Consumers outside PM Surya Ghar do not have to use an empanelled vendor and can still get net metering, but they pay the full cost themselves. For most homes, giving up up to ₹1.56 lakh in subsidy makes no sense.
Is a vendor empanelled with Tata Power-DDL allowed to install in Janakpuri?
Only if it is also registered for BRPL, or registered at the national or multi-state level. State-level empanelment in Delhi is DISCOM-wise, so always filter the portal list by BRPL, not just by Delhi.
I already registered for free solar on solar.delhi.gov.in. Can I hire a private installer instead?
You can move to the open route and choose your own BRPL empanelled vendor, but you will then pay that vendor’s price minus subsidies instead of getting a zero-cost system. Check your application status first and avoid duplicate applications on the same CA number, as that can cause rejection.
Can tenants in Janakpuri apply for rooftop solar subsidy?
Generally, the subsidy is meant for the household that owns the house and the roof, and the application runs on the electricity connection in the owner’s name. A tenant would need the owner to apply, or at least the owner’s consent and a connection in a name that matches the application.
How long does the whole process take in Janakpuri?
On the open route, physical installation takes only a few days. The paperwork, BRPL inspection and net meter installation add more time, and subsidy release follows DISCOM approval. On the free solar route, timing depends on the IPGCL vendor tender, which was still pending in November 2026.
Will my electricity subsidy from the Delhi government stop if I install solar?
No. The Delhi government has said existing electricity subsidies continue for eligible consumers alongside solar savings, subject to the usual rules. Remember that the bill subsidy is not available where gross consumption crosses 400 units a month.
Final Recommendation
Start with your last 12 BRPL bills. If your average was 400 units or less in FY 2025-26, register for the free solar route on solar.delhi.gov.in and wait for the government-selected vendor rather than paying a private company. If you use more, want a bigger system or need special design for a shared builder-floor roof, take the open route. Shortlist two or three installers, verify each one in the BRPL list on pmsuryaghar.gov.in, settle roof consent and bill-name issues first, and only then sign the consumer-vendor agreement.
3 thoughts on “DISCOM Approved Solar Installers in Janakpuri, West Delhi: How to Find, Verify and Choose One (2026)”