Solar Panel Dealers in Paschim Vihar and Punjabi Bagh, Delhi: How to Find a Verified Installer in 2026

The safest way to find solar panel dealers in Paschim Vihar and Punjabi Bagh is to pick an installer that is registered as a vendor for BSES Rajdhani (BRPL) on the PM Surya Ghar national portal, because both areas fall under BRPL and only a registered vendor can get your subsidy and net meter approved. Local shops on Rohtak Road, Jwalaheri Market and around Punjabi Bagh can sell you panels, but a shop listing alone does not mean they can file your subsidy.

This matters more than ever right now. Delhi changed its solar policy in September 2026, the combined subsidy has gone up, and new panel rules started on 1 June 2026. A wrong dealer choice can cost you the full subsidy. Below you will find how to check a dealer, what a fair quote looks like, and the problems that are specific to DDA flats, builder floors and kothis in West Delhi.

Quick Overview

What you need to know Paschim Vihar and Punjabi Bagh answer
Electricity company (DISCOM) BSES Rajdhani Power Ltd (BRPL) for most homes. Confirm from your bill.
Who can install with subsidy Only vendors registered for BRPL on pmsuryaghar.gov.in
Maximum subsidy (2026) Up to ₹1.56 lakh combined (₹78,000 central + up to ₹78,000 Delhi) for eligible homes
Free solar option Up to 3 kW at no cost for homes using up to 400 units a month, under the Delhi scheme
Panel rule Panels from ALMM List-I made with ALMM List-II (Indian) cells for subsidy and net metering
Roof space needed Roughly 100 sq ft of shadow-free roof per kW
Where to apply pmsuryaghar.gov.in or solar.delhi.gov.in, with net metering handled through BRPL

Which Electricity Company Serves Paschim Vihar and Punjabi Bagh?

Paschim Vihar and Punjabi Bagh are served by BSES Rajdhani Power Ltd (BRPL). BRPL covers South and West Delhi and runs 23 divisions, including Punjabi Bagh, so your net metering file goes to the local BRPL division office.

This one detail filters out a lot of dealers. A vendor who works mostly in Rohini or Pitampura deals with Tata Power DDL, which has its own portal and staff. That vendor may still be good, but ask whether they are also registered with BRPL. If they are not, they cannot complete your subsidy file.

Important Point to be Considered! Border pockets do not always follow the usual map. Check the DISCOM name printed on your latest electricity bill before you shortlist anyone.

What Is the Difference Between a Solar Dealer, Distributor and Installer?

A dealer or distributor mainly sells panels, inverters and batteries, while an installer (also called an EPC company) designs, installs and gets your system approved. For a home rooftop system with subsidy, you need an installer who is a registered vendor. Buying hardware from a shop and hiring a local electrician usually means no subsidy.

Type of seller What they do Can they get you the subsidy? Best for
Panel or inverter dealer (shop) Sells equipment over the counter No, unless also a registered vendor Off-grid setups, spare parts, battery replacement
Wholesale distributor Supplies installers and shops in bulk No Businesses, not homeowners
Registered vendor / EPC installer Survey, design, installation, net meter, subsidy filing Yes Grid-tied home rooftop systems
Brand-authorised channel partner Installs one brand’s panels Only if registered on the portal Buyers set on a specific brand

When you search for “solar panel shop near Paschim Vihar”, Google Maps mixes all four types together. Many listings near Jwalaheri Market and Rohtak Road are electrical wholesalers. That is fine for a battery, but not for a subsidised rooftop plant.

How Do You Check if a Solar Dealer Is Government Approved?

You can check it yourself in about ten minutes on the PM Surya Ghar portal. Open the registered vendor list, choose Delhi and BSES Rajdhani, and search the exact company name on the dealer’s GST bill or visiting card.

  1. Go to pmsuryaghar.gov.in and open the vendor list section.
  2. Select state as Delhi and DISCOM as BSES Rajdhani Power Ltd.
  3. Search the legal company name, not the shop name or brand name painted on the board.
  4. Cross-check the Delhi list on the Delhi Government solar portal, which has its own empanelled vendors section.
  5. Ask for the panel model number and confirm it on the MNRE ALMM list.

For a deeper checklist on certificates and paperwork, see our guide on checking DISCOM-approved solar installers in nearby Janakpuri. The same BRPL checks apply in Paschim Vihar and Punjabi Bagh.

Pro Tip! Google ratings with only 2 to 6 reviews tell you very little. A dealer with fewer stars but 40 or more detailed reviews that mention net metering and subsidy credit is often the safer pick.

What Changed in Delhi Solar Rules in 2026?

Three big things changed in 2026: the Delhi state subsidy rose to up to ₹78,000, homes using up to 400 units a month can get up to 3 kW free, and panels must now use Indian-made cells. Every dealer quote you collect should reflect all three.

Higher Delhi subsidy (second amendment)

Delhi’s Cabinet approved the second amendment to the Delhi Solar Energy Policy 2023 on 1 September 2026, and the registration portal opened on 21 September 2026. The combined central and Delhi subsidy now goes up to ₹1.56 lakh for eligible homes. Delhi CM Rekha Gupta also said systems above 3 kW get the same ₹1.56 lakh total.

Older articles still show ₹1.08 lakh (₹78,000 central + ₹30,000 Delhi). That was the figure from the first amendment in 2025. If a dealer in Punjabi Bagh still quotes your subsidy as ₹1.08 lakh, ask why.

Free solar for homes up to 400 units

According to the official Delhi scheme overview, consumers with average monthly use below 400 units can get a solar plant installed free by the Delhi Government. These installs run under a Utility Led Aggregation (ULA) or DISCOM trusteeship model, with vendors empanelled by the government for systems up to 3 kW.

Here is the part most guides skip. Many independent houses in Paschim Vihar and Punjabi Bagh use far more than 400 units in summer because of multiple ACs. Reports on the scheme say homes above 400 units can still apply for up to 3 kW, but they pay the balance left after the ₹1.56 lakh subsidy. So a large West Delhi kothi is usually not in the “free” bucket, and a dealer quote still matters.

New ALMM List-II panel rule

From 1 June 2026, MNRE requires net-metering projects to use ALMM List-I modules made with ALMM List-II cells. In simple words, the solar cells inside the panel must also be made in India by an approved maker. Older stock lying in a godown may not qualify, even if the brand name looks familiar.

Important Point to be Considered! Subsidy amounts and scheme rules are being updated often this year. Treat every figure in a quote as provisional and confirm it on solar.delhi.gov.in before you pay any advance.

How Much Does Rooftop Solar Cost in Paschim Vihar and Punjabi Bagh?

A 3 kW on-grid system in Delhi costs a little over ₹2 lakh before subsidy, so after the ₹1.56 lakh combined subsidy your own cost can drop to well under ₹1 lakh. Exact prices depend on panel brand, structure height and inverter choice.

As a reference, SolarSquare listed an indicative 3 kW price of about ₹2.25 lakh without subsidy in Delhi as of April 2026. Prices may run a little higher after the ALMM List-II change, because Indian cells cost more.

System size Central subsidy Delhi subsidy (2026 amendment) Combined Good for
1 kW ₹30,000 Check portal Check portal Small flat, low usage
2 kW ₹60,000 Up to ₹52,000 Up to ₹1.12 lakh 2 BHK DDA flat
3 kW ₹78,000 Up to ₹78,000 Up to ₹1.56 lakh Most builder floors
5 kW to 10 kW ₹78,000 (capped) Up to ₹78,000 (capped) Up to ₹1.56 lakh Kothis with 3 or more ACs

The central figures come from the Delhi solar portal’s central subsidy page and MNRE’s structure of ₹30,000 per kW for the first 2 kW and ₹18,000 for the third kW. The Delhi 2 kW figure is based on published scheme breakdowns, so confirm it at the time you apply.

For a full breakdown, read our 3 kW rooftop solar cost after subsidy in Delhi guide.

Example: a Punjabi Bagh builder floor

Say the top-floor owner of a builder floor in West Punjabi Bagh gets a ₹2.3 lakh quote for 3 kW. If the full ₹1.56 lakh subsidy applies, their own spend is about ₹74,000. A 3 kW system can produce roughly 100 to 140 units per kW each month, so around 300 to 420 units, which covers a big share of a typical summer bill. Shade from a neighbour’s water tank or a taller building can cut that.

Can You Install Solar on a DDA Flat or Builder Floor in Paschim Vihar?

Yes, but the roof has to legally belong to you or you need written consent from the people who share it. This is the most common reason solar plans stall in Paschim Vihar’s DDA blocks and Punjabi Bagh’s builder floors, and almost no dealer listing talks about it.

  • Independent house or kothi: The easiest case. You own the roof, so the dealer only checks shade, load and structure strength.
  • Builder floor: Roof rights usually sit with the top-floor owner. Check your sale deed. If roof rights are shared, get a signed no-objection from other floor owners.
  • DDA flat in a multi-storey block: The terrace is common property. You will usually need RWA or society consent, and space is limited. Group Housing Societies can also apply for common-area solar under the scheme.
  • Rented house: The net meter goes on the registered electricity connection, so the owner’s consent and documents are needed.

Our step-by-step rooftop solar installation process for independent houses in Delhi walks through the site survey and approval stages in order.

Pro Tip! Many Punjabi Bagh roofs double as a terrace for family use. Ask the dealer for an elevated structure (high-rise mounting) so you keep the space usable below the panels. It costs more, so make sure it is written into the quote.

What Should a Good Dealer Quote Include?

A good solar quotation lists exact panel and inverter models, structure type and height, warranty terms, net metering charges and who files the subsidy. If any of these are missing, the price is not really comparable with another quote.

  • Panel brand, model number, wattage and ALMM status (List-I with List-II cells)
  • Inverter brand, capacity and warranty
  • Structure material (hot-dip galvanised steel is common), height and wind-load rating
  • Cable, earthing, lightning arrester and safety devices
  • Net meter, BRPL application work and any fees
  • Subsidy filing on your behalf, including the DCR certificate for your panels
  • Free maintenance period and what it covers
  • Payment schedule linked to milestones, not full advance

Use our guide on how to compare rooftop solar quotations in Delhi to put two or three quotes side by side line by line.

How Does Net Metering Work With BSES Rajdhani?

Net metering lets you send extra daytime solar power to the grid and adjust it against what you use at night. For homes in Paschim Vihar and Punjabi Bagh, the application is filed with BRPL, usually by your registered vendor, after the system is installed.

The general flow is simple. You register on the portal, pick a vendor, the vendor installs, BRPL inspects and fits the net meter, and then the subsidy is released to your bank account. Reports on the 2026 amendment say Delhi aims to cut net metering approval time to around 25 days.

For the exact forms, see our BSES solar net metering application process guide, and keep the documents required for solar net metering in Delhi ready before the dealer’s first visit.

What Mistakes Do People Make When Choosing a Solar Dealer in West Delhi?

The biggest mistake is choosing on price alone and finding out later that the vendor or panels do not qualify for subsidy. Here are other common slip-ups:

  1. Paying a big advance before registration. Register on the portal first, then sign with a vendor.
  2. Going too big for the subsidy. The subsidy stops growing after 3 kW. A larger system can still make sense for a heavy-use kothi, but you pay the extra yourself.
  3. Accepting “Tier 1 imported panels” for a subsidised install. Subsidised systems need domestic content panels.
  4. Ignoring shade. Water tanks, mumty walls and nearby trees in older Punjabi Bagh lanes can shade panels in winter mornings.
  5. Not asking who handles service. A dealer based in Mayapuri or Mangolpuri may be fine, but ask how fast they reach Paschim Vihar for a fault.
  6. Mixing up battery backup with grid-tied solar. A standard on-grid system shuts down during a power cut for safety. If you need backup, ask about a hybrid inverter and battery, which add cost without adding subsidy.

Should You Pick a Local Dealer or a Big Solar Company?

Pick whoever is a registered BRPL vendor with good, detailed reviews and a clear service promise. A local Paschim Vihar or Punjabi Bagh firm often responds faster for service. A large company may offer a stronger structure warranty and app monitoring. Neither is automatically better.

Factor Local West Delhi dealer Large national company
Site visit speed Usually same week Can take longer in peak season
Price Often more flexible Usually fixed packages
After-sales service Depends on the owner Process-driven, sometimes slow
Paperwork experience with BRPL Ask for recent local installs Usually strong

Ask any dealer for two or three addresses of past installs in A-block, B-block or nearby Punjabi Bagh colonies. Seeing a working system on a similar roof tells you more than any brochure.

Frequently Asked Questions

Is rooftop solar really free in Paschim Vihar and Punjabi Bagh?

It can be free for homes whose average monthly use is up to 400 units, for systems up to 3 kW under the Delhi scheme. Homes above that limit can still apply but pay the balance after subsidy. Your usage history on the BRPL bill decides which group you fall in.

Can I choose my own dealer under the free solar scheme?

The free scheme runs through vendors empanelled by the Delhi Government under the ULA model, so the vendor list is set by the government. If you are paying part of the cost, check on solar.delhi.gov.in which vendor options are open to you at the time you register, as the process is still being rolled out.

How long does installation take after I sign with a dealer?

The physical installation of a 3 kW system usually takes one or two days. The full process, including portal approval, BRPL inspection, net meter fitting and subsidy credit, usually takes several weeks. Track each stage using our Delhi solar portal application status check guide.

Do I need a new electricity connection or higher load for solar?

Usually no new connection is needed. The solar system size is normally kept within your sanctioned load. If you want a system bigger than your sanctioned load, your dealer may need to help you apply for a load increase with BRPL first.

Do solar panels work during a power cut in West Delhi?

A standard grid-tied system stops working during a power cut, so it does not act as backup. If cuts are common in your block, ask the dealer about a hybrid inverter with a battery. The battery is an extra cost that does not increase your subsidy.

Is a 5 kW system worth it if the subsidy stops at 3 kW?

It can be, if your home regularly uses 500 units or more a month. The extra 2 kW is paid fully by you, but it can still pay back over time through lower bills. Have the dealer size the system from 12 months of bills, not just one summer bill.

Final Recommendation

If you live in Paschim Vihar or Punjabi Bagh, start with your electricity bill, not with a Google Maps search. Confirm BSES Rajdhani as your DISCOM, check your average monthly units, and register on the portal. Then shortlist two or three dealers who appear on the BRPL vendor list, ask each for a written quote with ALMM List-II panels, and compare them line by line.

Homes under 400 units should look at the free scheme first. Larger kothis and builder floors should focus on structure quality, service response and a quote that correctly reflects the ₹1.56 lakh combined subsidy. For the latest rules, read our full Delhi solar subsidy guide before you sign.

Leave a Comment

Share with